Advantages of diesel driven pump automatic control
Diesel driven pump adopts a large-capacity oil tank, which greatly increases the continuous running time of the generator and reduces the user's workload; adopts an industrial oil level indicator, which is more durable and reliable in use.
Its panel fittings adopt German Hansha air switch, which is safe and reliable to use. The adopted OHV engine ensures effective combustion, good combustion economy, low noise and vibration, light weight, and small size. The new aluminum alloy self-priming pump body and cast iron impeller/turbine cover greatly improve the durability of the water pump. It adopts the international standard PF thread, which has strong versatility and can be configured with different types of water pipes. It has large flow, high lift, stable performance, beautiful appearance, and a wide range of applications. Check whether the gasoline in the fuel tank is sufficient; whether the fuel valve and pipeline are sufficient There is oil leakage.
Check whether the oil level is between the upper limit and the lower limit; check the oil quality to determine whether it needs to be replaced; check whether the starting battery voltage is above 12V, and observe whether the battery is damaged or leaking; if the generator set is not used for a long time, start the battery It will lose power due to self-discharge, please use an external charger to charge the battery. After the generator set is used for the first 20 hours, the oil and filter should be replaced immediately. After every 100 hours of use, the oil and filter must be replaced. The air filter element of the generator set must be cleaned every 100 hours of use and replaced every 200 hours; 3. Power generation The spark plug gap should be checked and carbon deposits should be cleaned every 100 hours of use of the unit, and replaced every 300 hours.
Diesel driven pump control system starts the engine to drive the self-priming pump to pump fluid, which is convenient and fast. Equipped with a lighting system to adapt to night work, it is an independent mobile, without any auxiliary engineering; mobile operation, arrive at any time; high displacement or long-distance transportation; single person installation and operation in a short time; no additional power supply and lifting equipment ; No complicated maintenance. The diesel driven pump does not need to be vacuumed and other methods are used to assist in pumping. After the pumping pipe is extended into the required pumping area, the pump can be directly started to pump and drain water. It adopts a cartridge mechanical seal, which uses independent lubrication and cooling chambers The cooling cavity is lubricated by oil, and the cooling cavity maintains a pressure of 2 bar.
The thick shaft of adopts a stepless design, the diameter shall not be less than 85mm, to reduce the deviation of the shaft and extend it to ensure that the rotor runs for a long time under the rigid support of the two ends, and the two ends of the support are equipped with mechanical seals to ensure that the bearing does not contact the conveying material. Ensure that the shaft does not deviate and reduce the wear of the rotor and related parts. Pumping capacity: ordinary plastic bags, textile bags, mud, hair and other debris can be smoothly pumped and discharged without blocking the pump body. Pump imported metal skeleton rubber tube, export hose, and equipped with quick connector, adopts 4-wheel or 2-wheel alloy steel chassis frame, hard steel soundproof cover, and is equipped with trailer frame; control system: adopts integrated panel for centralized control .