diesel engine water pump for irrigation is suitable for unattended emergency water supply system. The product has the characteristics of technology leading, high degree of automation, superior performance, complete protection function, reasonable structure, simple installation and high cost performance. When the factory suddenly loses power, the diesel engine emergency water supply pump set automatically starts to supplement. Pipe network pressure.
The length of life of an irrigation diesel pump unit depends on how it is used properly in the usual way. If it is used in accordance with the skill of use, it will directly increase its life time. The first thing to be clear is that the three types of filters for the irrigation diesel pump unit include air filter, oil filter and diesel filter, to extend the service life of the irrigation diesel pump unit. During the use, it is necessary to strengthen the maintenance of the three filters of the air filter, the oil filter and the diesel filter to fully exert their functions.
If the oil filter is not in time for maintenance in the diesel engine water pump for irrigation, the filter element is clogged, the oil pressure is increased, the safety valve is opened, and the lubricating oil directly flows into the main oil passage, which will aggravate the wear of the lubricating surface and affect the service life of the diesel water pump unit. Therefore, the oil filter should be cleaned once every 180-200 hours of operation. If it is damaged, it should be replaced immediately to prevent impurities from entering the lubrication surface.
The three filters, air filter, oil filter and fuel filter, are consumables and must be replaced when used for more than 500 hours. In this way, the service life of the irrigation diesel water pump can be better extended. The pump on the irrigation diesel engine pump should prolong the life, and the first is to avoid the empty pump. The second operation is to avoid rust and corrosion of the impeller and the seal ring, and damage the seal gap. Third, it is necessary to avoid the horizontal centrifugal pump pumping more than the suction stroke. Do not put the fourth packing too tight, and have enough cooling water to flow out of the shaft.