As a key equipment in the field of fire protection, electric fire pump will directly affect the normal use of emergency situations. If it is left for a long time, it is easy to cause problems, so it should be cleaned and repaired regularly. Let's take a look at how to clean the electric fire pump?
The fire pumps on the market are all cast iron. Some people feel that in order to better remove the dirt on the surface of the equipment, corrosive cleaning products are used for cleaning, but this is very bad. If you use corrosive cleaning products Cleaning will increase the surface area of corrosion. It should be noted that the fire pump cannot be rinsed with water. If the fire pump is washed with water, the motor cannot enter the water. Otherwise, it is easy to cause a short circuit and cause the use of the equipment. Life is shortened.
Precautions during the cleaning of fire pump
1. During the cleaning process, you should pay attention to the cleaning of the dust. The dust must be cleaned with a wet rag first. At the same time, you should pay attention to the cleaning of various parts. Therefore, in the cleaning process, it should be noted that the towels for cleaning dust should not be too dry or bring water.
2. During the cleaning process, if there are water stains, be sure to wipe some water stains on the surface of the equipment with a dry towel. This method can better protect the fire pump.
3. The cleaning of the electric fire pump must be inseparable from the cleaning of the impeller. When cleaning, it is necessary to pay attention to the presence of some scale left on the seals and bearings of the impeller, or whether the rust is clean when cleaning For different types of fire doors, the structure of the parts is different from each other, so all we need to do is clean the related parts.
Electric fire pumps are generally mechanical equipment, so mechanical equipment should be cleaned if it is used for a long time, so as to improve work efficiency and extend the service life of the equipment. In addition, in the process of cleaning the fire pump, you should find a professional person to clean it, because considering the performance of the equipment, if it is not professional, it will affect the operation of the equipment motor, causing damage or affecting the service life.