Customer Service:+86 57767966258. E-mail: jodan@borrapump.com
News
Current Location:Home > News > There are requirements for the standard cleaning of electric fire pump

There are requirements for the standard cleaning of electric fire pump

Author: admin Source: the internet Posted On: 2020/7/13 16:55:25

Electric fire pump are generally mechanical equipment, so mechanical equipment should be cleaned if it is used for a long time, so as to improve work efficiency and extend the service life of the equipment. In addition, in the process of cleaning the fire pump, you should find a professional person to clean it, because considering the performance of the equipment, if it is not professional, it will affect the operation of the equipment motor, causing damage or affecting the service life.
The fire pumps on the market are all cast iron. Some people think that in order to better remove the dirt on the surface of the equipment, corrosive cleaning products are used for cleaning, but this is very bad. If you use corrosive cleaning products Cleaning will increase the surface area of ​​corrosion. It should be noted that the fire pump can not be washed with water, because the motor can not enter the water if the fire pump is washed with water, otherwise it is easy to cause a short circuit, resulting in the use of equipment Life is shortened.
  Precautions during the cleaning of fire pump
1. The electric fire pump should pay attention to the cleaning of the dust during the cleaning process. The dust must be cleaned with a wet rag first. At the same time, the parts should also be cleaned, otherwise it will easily cause a large amount of dust accumulation and blockage Problem, so in the cleaning process, you should pay attention to the cleaning dust towels should not be too dry, and can not bring water.
   2. During the cleaning of the electric fire pump, if there are water stains, be sure to wipe some water stains on the surface of the equipment with a dry towel. This method can better protect the fire pump.
3. The cleaning of the electric fire pump must be inseparable from the cleaning of the impeller. During the cleaning, it is necessary to pay attention to the remaining scale on the seals and bearings of the impeller, or whether the rust is clean during the cleaning. For different types of fire doors, the structure of the parts is different from each other, so all we need to do is clean the related parts.

electric fire pump



Copyright © Borra Technology Co.,Ltd GoogleSitemap